Ever wonder about the process your technician follows when doing a shower regrouting, Temecula? In this post, we’re sharing the steps he takes to ensure that your project ends up a success.

Step #1: Gathering the supplies – Your technician will need items like caulk and caulk gun, large bucket, drill/driver, dust mask, rubber gloves, safety glasses, utility knife, grout saw, grout sponge, among others.

Now, the question: Why do you need to know this if your technician produces these items himself? This is so that you have a good grasp of the value of the service to what you pay.

Step #2: Removing the old grout – This is the next step of your technician when doing a shower regrouting, Temecula. In this process, he removes the old grout. This can be a tedious task, but necessary. Your technician will use a utility knife or a grout saw to slice and crack the old grout out.

Step #3: Mixing the new grout – Once the tile lines are free from old grout debris, your technician starts to mix the new grout. He does this as fast as possible to beat the time that the grout hardens and becomes difficult to apply. In fact, not acting fast can make the grout unusable.

Step #4: Packing the joints – Your technician begins to plop a dollop of grout and smooth it at a 45-degree angle. The objective here is to put enough grout in those joints – or the space between tiles. The grout helps hold the tiles together. He then presses hard to ensure that it is tight.

Step #5: Wiping the excess away – After the lines between the tiles are filled, your technician scrapes and wipes the excess off. He implements a diagonal motion to make the job a lot easier but effective. He does this as fast as possible since the grout will dry up instantly. Excess grout that stays longer than necessary makes it harder to remove.

Step #6: Wiping off the rest of the debris from the tile – Using a damp sponge, your technician will wipe the remaining debris away. He implements circular strokes to make the cleaning more effective and efficient.

Step #7: Scraping the corners – The technician does this with the help of a utility knife. This will remove any excess globs of caulks from corners.

After doing the caulking, your technician will let it dry. The task is complete. After a while, your reborn shower can be used again.

Are you looking for a reputable technician for shower regrouting, Temecula? Contact us at (951) 240-5520.